Perfluoropolyether (PFPE) lubricants are often chosen for their extreme temperature capabilities (-90° C to 250° C), excellent compatibility with virtually all materials (including plastics and elastomers), or their inertness: PFPEs do not react with oxygen, other gasses, chemicals, solvents, or automotive fluids. ECL offers PFPE oils, greases, and dispersions.
Product | Temp. Range °C | Description | |
---|---|---|---|
CHRISTO-LUBE® 5110UV-L | -75 to 250 | CHRISTO-LUBE® MCG 5110UV-L is PFPE fluid cut with non-combustible fluorinated solvent and a suspended UV dye for easy identification. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives it the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® 5115 | -60 to 200 | CHRISTO-LUBE® 5115 is AbsoLube 411A cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a film of AbsoLube 411A. An ultraviolet dye is dispersed in this material to make the residual film of AbsoLube 411A more visible. Details of AbsoLube 411A are included below: AbsoLube 411A is synthetic grease made from polyfluoropolyether (PFPE) fluid thickened with polytetrafluoroethylene (PTFE) polymer. This grease has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives AbsoLube 411A the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® 5115A | -60 to 200 | CHRISTO-LUBE® 5115A is AbsoLube 411A cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a film of AbsoLube 411A. Details of AbsoLube 411A are included below: The base grease AbsoLube 411A is synthetic grease made from polyfluoropolyether (PFPE) fluid thickened with polytetrafluoroethylene (PTFE) polymer. This grease has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives AbsoLube 411A the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® 5130 | -75 to 250 | CHRISTO-LUBE® 5130 is PFPE fluid cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives CHRISTO-LUBE® 5130 the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® 5170A | -60 to 200 | CHRISTO-LUBE® 5170A is AbsoLube 411A cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a film of ~bsoLube 411A. An ultraviolet dye is dispersed in this material to make the residual film of AbsoLube 411A more visible. Details of AbsoLube 411A are included below: The base grease AbsoLube 411A is synthetic grease made from polyfluoropolyether (PFPE) fluid thickened with polytetrafluoroethylene (PTFE) polymer. This grease has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives AbsoLube 411A the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® 5180 | -20 to 250 | CHRISTO-LUBE® 5180 is a high viscosity PFPE fluid cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives CHRISTO-LUBE® 5180 the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® 5250UV-L | -40 to 200 | CHRISTO-LUBE® MCG 5250UV-L is PFPE fluid cut with non-combustible fluorinated solvent and a suspended UV dye for easy identification. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives it the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® 6004 | — | CHRISTO-LUBE® 6004 is a fast drying, non-flammable, ozone safe solvent for cleaning fluorinated oils and greases. |
|
CHRISTO-LUBE® B4010 | -60 to 300 | CHRISTO-LUBE® B4010 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. CHRISTO-LUBE® B4010 also possesses excellent radiation hardness and low evaporation loss that make it suitable for aerospace applications. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. It also has an extremely high viscosity index which means that its viscosity changes less than many other fluids as temperature changes. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® B4011 | -60 to 300 | CHRISTO-LUBE® B4011 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. CHRISTO-LUBE® B4011 also possesses excellent radiation hardness and low evaporation loss that make it suitable for aerospace applications. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. It also has an extremely high viscosity index which means that its viscosity changes less than many other fluids as temperature changes. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® B4039 | -40 to 200 | CHRISTO-LUBE® B4039 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® B4055 | -40 to 200 | CHRISTO-LUBE® B4055 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® B4077 | -35 to 200 | CHRISTO-LUBE® B4077 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® MCG 1004 | -40 to 140 | CHRISTO-LUBE® MCG 1004 is a fully fluorinated, low viscosity PFPE oil. This oil operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This oil is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 1005 | -30 to 150 | CHRISTO-LUBE® MCG 1005 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. It also has an extremely high viscosity index which means that its viscosity changes less than many other fluids as temperature changes. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® MCG 1006 | -60 to 300 | CHRISTO-LUBE® MCG 1006 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. CHRISTO-LUBE® MCG 1006 also possesses excellent radiation hardness and low evaporation loss that make it suitable for aerospace applications. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. It also has an extremely high viscosity index which means that its viscosity changes less than many other fluids as temperature changes. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® MCG 1007 | -50 to 250 | CHRISTO-LUBE® MCG 1007 is a fully fluorinated, medium viscosity PFPE oil. This oil operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This oil is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 1008 | -25 to 240 | CHRISTO-LUBE® MCG1008 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® MCG 1009 | -50 to 120 | CHRISTO-LUBE® MCG 1009 is a light viscosity fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. |
|
CHRISTO-LUBE® MCG 101 | -20 to 220 | CHRISTO-LUBE® MCG 101 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE and fortified with anti-corrosion additives. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 1011 | -30 to 200 | CHRISTO-LUBE® MCG 1011 is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium viscosity PFPE oil is especially useful in lubricating plastic and elastomer components commonly found in automotive applications. CHRISTO-LUBE® MCG 1011 is registered with NSF as a H1 lubricant meaning it is acceptable for use in or around food processing equipment. It is designed for use in all food processing operations including mixing, stirring, baking, frying, cooking, freezing, cleansing, packaging, canning and bottling. This product is registered H1 by the NSF (149677) |
|
CHRISTO-LUBE® MCG 1011K | -30 to 200 | CHRISTO-LUBE® MCG 1011K is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium viscosity PFPE oil is especially useful in lubricating plastic and elastomer components commonly found in automotive applications. CHRISTO-LUBE® MCG 1011K is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium viscosity PFPE oil is especially useful in lubricating plastic and elastomer components commonly found in automotive applications. |
|
CHRISTO-LUBE® MCG 1011RP | -30 to 260 | CHRISTO-LUBE® MCG 1011RP is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium viscosity PFPE oil is especially useful in lubricating plastic and elastomer components commonly found in automotive applications. CHRISTO-LUBE® MCG 1011RP is formulated with corrosion inhibitors for protection of metal parts. |
|
CHRISTO-LUBE® MCG 1013 | -70 to 150 | CHRISTO-LUBE® MCG 1013 is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. CHRISTO-LUBE® MCG 1013 is also formulated with corrosion inhibitors for protection of lubricated parts in long term storage. |
|
CHRISTO-LUBE® MCG 102 | -20 to 220 | CHRISTO-LUBE® MCG 102 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE and fortified with anti-wear additives. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 1024 | -20 to 250 | CHRISTO-LUBE® MCG 1024 is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This high viscosity PFPE oil is especially useful in lubricating metal components at high temperatures but can also be used where non-reactivity with harsh chemicals, fuels and solvents are important factors |
|
CHRISTO-LUBE® MCG 1026 | -50 to 300 | CHRISTO-LUBE® MCG 1026 is high technology perfluoropolyether fluid that possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. Its very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. CHRISTO-LUBE® MCG 1026 also possesses excellent radiation hardness and low evaporation loss that make it suitable for aerospace applications. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. It also has an extremely high viscosity index which means that its viscosity changes less than many other fluids as temperature changes. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® MCG 1028 | -70 to 150 | CHRISTO-LUBE® MCG 1028 is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. |
|
CHRISTO-LUBE® MCG 103 | -40 to 140 | CHRISTO-LUBE® MCG 103 is a fully fluorinated, low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 103-D5 | -40 to 140 | CHRISTO-LUBE® MCG 103-D5 is a fully fluorinated, low viscosity PFPE grease thickened with PTFE and cut with a fluorinated solvent. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 1030 | -23 to 260 | CHRISTO-LUBE® MCG 1030 is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This high viscosity, low vapor pressure PFPE oil has excellent thin-film strength and was formulated specifically for reducing friction and wear in precision high vacuum applications. |
|
CHRISTO-LUBE® MCG 1031 | — | CHRISTO-LUBE® MCG 1031 is a high-performance, inert, fluorinated fluid used for heat transfer and for various high-tech applications in the Electrical & Electronics and Semiconductors markets. |
|
CHRISTO-LUBE® MCG 1032 | — | CHRISTO-LUBE® MCG 1032 is a fluorinated corrosion inhibitor which when applied, provides a long term protective film on metal surfaces. |
|
CHRISTO-LUBE® MCG 1034 | -20 to 250 | CHRISTO-LUBE® MCG 1034 is a fully fluorinated oil which operates under extreme temperature conditions and has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This high viscosity PFPE oil is especially useful in lubricating metal components at high temperatures but can also be used where non-reactivity with harsh chemicals, fuels and solvents are important factors. CHRISTO-LUBE® MCG 1034 is formulated with corrosion inhibitors for protection of metal parts. This product is registered H1 by the NSF (138047) |
|
CHRISTO-LUBE® MCG 1036 | -30 to 120 | CHRISTO-LUBE® MCG 1036 is a fully fluorinated, low viscosity PFPE oil. This oil operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This oil is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 1037N | -50 to 260 | CHRISTO-LUBE® MCG 1037N is a fully fluorinated oil which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This high viscosity PFPE oil is especially useful in lubricating plastic and elastomer components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 106 | -75 to 150 | CHRISTO-LUBE® MCG 106 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft fluorinated lubricant is especially useful in lubricating bearings, gears, splines and actuators at low temperatures where extremely low torque is an important factor. CHRISTO-LUBE® MCG 106 is formulated with corrosion inhibitors for protection of lubricated parts in long term storage. |
|
CHRISTO-LUBE® MCG 1063 | -50 to 300 | CHRISTO-LUBE® MCG 1063 is high technology perfluoropolyether fluid cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. The PFPE oil film left behind possesses excellent thermal stability and resistance to chemicals and oxygen-rich environment. It’s very low pour point and excellent oxidative stability allow it to function in a very broad temperature range. CHRISTO-LUBE® MCG 1063 also possesses excellent radiation hardness and low evaporation loss that make it suitable for aerospace applications. Since it is non-reactive with metal, plastic, rubber, and other elastomers, it is useful in a wide variety of applications. It also has an extremely high viscosity index which means that its viscosity changes less than many other fluids as temperature changes. PFPE fluids have extremely low surface tension that allows them to work in situations where other lubricants fail due to lubricant starvation. |
|
CHRISTO-LUBE® MCG 1066 | -54 to 149 | CHRISTO-LUBE® MCG 1066 is insoluble in most solvents, non-reactive with strong acids and alkalis, compatible with plastics, elastomers and most metals, and has a wide operating temperature range. Because of its unique properties, CHRISTO-LUBE® MCG 1066 can be used in many areas of high technology including damping, hydraulic, and heat transfer fluids, lubricating oil. It can also be used in environments of extreme corrosiveness, oxidation and radiation where conventional oils would fail to function. |
|
CHRISTO-LUBE® MCG 106B | -85 to 150 | CHRISTO-LUBE® MCG 106B is a fully fluorinated, very low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 109 | -65 to 260 | CHRISTO-LUBE® MCG 109 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating bearings, gears and actuators typically found in the semiconductor industry. CHRISTO-LUBE® MCG 109 is clean room compatible and performs exceptionally well under extreme vacuum environments. |
|
CHRISTO-LUBE® MCG 109RP | -65 to 250 | CHRISTO-LUBE® MCG 109RP is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE and fortified with anti-corrosion additives. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and in a vacuum and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 110 | -60 to 260 | CHRISTO-LUBE® MCG 110 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. This product is registered H1 by the NSF (135017)
|
|
CHRISTO-LUBE® MCG 111 | -60 to 260 | CHRISTO-LUBE® MCG 111 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating valve and regulator components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. CHRISTO-LUBE® MCG 111 is qualified to MIL-PRF-27617G Types I, II & III and is also registered with NSF as an H-1 lubricant meaning it is acceptable for use in or around food processing equipment. It is designed for use in all food processing operations including mixing, stirring, baking, frying, cooking, freezing, cleansing, packaging, canning and bottling. Cage Code 0DRK3 This product is registered H1 by the NSF (135016) |
|
CHRISTO-LUBE® MCG 111-2 | -60 to 230 | CHRISTO-LUBE® MCG 111-2 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating valve and regulator components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. CHRISTO-LUBE® MCG 111-2 is qualified to MIL-PRF-27617G Types II & III. |
|
CHRISTO-LUBE® MCG 111-20 | -60 to 230 | CHRISTO-LUBE® MCG 111-20 is CHRISTO-LUBE® MCG 111 suspended in a non-combustible fluorinated solvent. Once applied to a lubricated part, the solvent will evaporate leaving a uniform thin film of CHRISTO-LUBE® MCG 111 on the surface. CHRISTO-LUBE® MCG 111-20 is especially useful in lubricating valve and regulator components such as threads and o-rings. |
|
CHRISTO-LUBE® MCG 111BLUE | -65 to 230 | CHRISTO-LUBE® MCG 111BLUE is a fully fluorinated, low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. It is dyed blue for easy detection against light colored surfaces |
|
CHRISTO-LUBE® MCG 111RP | -60 to 260 | CHRISTO-LUBE® MCG 111RP is a fully fluorinated grease thickened with PTFE and an anti-corrosion additive which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating valve and regulator components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 112 | -50 to 260 | CHRISTO-LUBE® MCG 112 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating valve and regulator components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 114 | -60 to 300 | CHRISTO-LUBE® MCG 114 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft fluorinated lubricant is useful in lubricating components found on aircraft and aerospace vehicles where resistance to hydrocarbon fuel and liquid oxygen are important factors. CHRISTO-LUBE® MCG 114 is qualified to MIL-PRF-27617G Type I |
|
CHRISTO-LUBE® MCG 116 | -30 to 230 | CHRISTO-LUBE® MCG 116 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is useful in lubricating components found on aircraft and aerospace vehicles where resistance to hydrocarbon fuel and liquid oxygen are important factors. CHRISTO-LUBE® MCG 116 is qualified to MIL-PRF-27617G Type III. |
|
CHRISTO-LUBE® MCG 117 | -65 to 260 | CHRISTO-LUBE® MCG 117 is a wide temperature range anti-rust grease for use in extreme environments. It is suited for use in systems where non-reactivity with harsh chemicals, strong acids and oxidizers, fuels, solvents, etc. is mandatory and in vacuum systems where pressures may be as low as 10-12 Torr. The grease is suitable for the lubrication of ball, plain spherical, roller and needle bearings, electrical contacts, gears, splines, valves, screw actuators, and in systems employing elastomeric and plastic seals, gaskets, and o-rings. Although CHRISTO-LUBE® MCG 117 is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the grease under certain extreme conditions. |
|
CHRISTO-LUBE® MCG 118 | -65 to 260 | CHRISTO-LUBE® MCG 118 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE and fortified with anti-wear additives. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and in a vacuum and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 125 | -65 to 230 | CHRISTO-LUBE® MCG 125 is a fully fluorinated, low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 126 | -20 to 260 | CHRISTO-LUBE® MCG 126 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 128 | -65 to 230 | CHRISTO-LUBE® MCG 128 is a fully fluorinated, low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This stiff consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 129 | -30 to 175 | CHRISTO-LUBE® MCG 129 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is particularly useful in lubricating valve and regulator components found in medical and industrial gas applications. CHRISTO-LUBE® MCG 129 is registered with NSF as a H1 lubricant meaning it is acceptable for use in or around food processing equipment. It is designed for use in all food processing operations including mixing, stirring, baking, frying, cooking, freezing, cleansing, packaging, canning and bottling. ~~In addition, this grease is formulated with rust preventative additives for protection of metal parts which are subject to corrosion. This product is registered H1 by the NSF (135039)
|
|
CHRISTO-LUBE® MCG 129N | -30 TO 175 |
|
|
CHRISTO-LUBE® MCG 130 | -65 to 230 | CHRISTO-LUBE® MCG 130 is a fully fluorinated, low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 132 | -20 to 260 | CHRISTO-LUBE® MCG 132 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is formulated with a thermally stable base oil making it especially suitable for use in high temperature environments. CHRISTO-LUBE® MCG 132 is formulated with corrosion inhibitors for protection of metal parts and is registered with NSF as a H1 lubricant meaning it is acceptable for use in or around food processing equipment. It is designed for use in all food processing operations including mixing, stirring, baking, frying, cooking, freezing, cleansing, packaging, canning and bottling. This product is registered H1 by the NSF (138046) |
|
CHRISTO-LUBE® MCG 132BN | -20 to 260 | CHRISTO-LUBE® MCG 132 BN is a wide temperature range, perfluoropolyether grease which was developed for use in low-pressure systems where non-reactivity with chemicals including strong acids and oxidizers, fuels, solvents, etc. is an important factor. The grease is suitable for use in applications including electrical contacts, gears, valves, screws, bearings, and in systems employing elastomeric and plastic seals, gaskets, and o-rings. Although CHRISTO-LUBE® MCG 132 BN is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the grease under certain extreme conditions. |
|
CHRISTO-LUBE® MCG 132N | -20 to 260 | CHRISTO-LUBE® MCG 132N is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This fluorinated lubricant is formulated with a thermally stable base oil making it especially suitable for use in high temperature environments. |
|
CHRISTO-LUBE® MCG 132N-NLGI-1 | -15 to 260 | CHRISTO-LUBE® MCG 132N-NLGI-1 is a fully fluorinated, high viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This stiff consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. This product is registered H1 by the NSF (149676) |
|
CHRISTO-LUBE® MCG 132NS | -15 to 260 | CHRISTO-LUBE® MCG 132NS is a fully fluorinated, high viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. It meets NSF H1. This product is registered H1 by the NSF (149797) |
|
CHRISTO-LUBE® MCG 133 | -20 to 260 | CHRISTO-LUBE® MCG 133 is a fully fluorinated grease thickened with PTFE and fortified with corrosion inhibitors, which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This NLGI Grade #2 fluorinated grease is especially useful in lubricating bearings, gears and actuators typically found in the semiconductor industry. CHRISTOLUBE ® MCG 133 is clean room compatible and performs exceptionally well under extreme vacuum conditions. |
|
CHRISTO-LUBE® MCG 134 | -50 to 260 | CHRISTO-LUBE® MCG 134 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating bearings, gears, splines and actuators over a broad operating temperature range. CHRISTO-LUBE® MCG 134 is formulated with corrosion inhibitors for protection of lubricated parts in long term storage. |
|
CHRISTO-LUBE® MCG 135 | -50 to 260 | CHRISTO-LUBE® MCG 135 is a fully fluorinated grease thickened with graphite which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. |
|
CHRISTO-LUBE® MCG 136N | -60 to 260 | CHRISTO-LUBE® MCG 136N is an extremely wide temperature capable PFPE grease thickened with PTFE. The high Viscosity Index fluorinated oil allows this grease to operate from -60°C to 260°C. This grease exhibits extremely low volatility, with minimal change in base oil viscosity over much of its operating range. This grease does not oxidize or varnish like most other lubricants when heated to extremes. It is also resistant to most aggressive chemicals and will not affect most plastics and elastomers. Great for bearings, gears, tracks, cables and most moving parts that need to operate over a wide temperature range. |
|
CHRISTO-LUBE® MCG 137 | -15 to 250 | CHRISTO-LUBE® MCG 137 is a fully fluorinated, high viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 138 | -30 to 260 | CHRISTO-LUBE® MCG 138 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 144 | -15 to 260 | CHRISTO-LUBE® MCG 144 is a fully fluorinated, high viscosity PFPE grease thickened with fumed silica. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 146 | -70 to 150 | CHRISTO-LUBE® MCG 146 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft fluorinated lubricant is especially useful in lubricating bearings, gears, splines and actuators at low temperatures where extremely low torque is an important factor. CHRISTO-LUBE® MCG 146 is formulated with corrosion inhibitors for protection of lubricated parts in long term storage and is also registered with NSF as an H-1 lubricant meaning it is acceptable for us in or around food processing equipment. It is designed for use in all food processing operations including mixing, stirring, baking, frying, cooking, freezing, cleansing, packaging, canning and bottling. |
|
CHRISTO-LUBE® MCG 146N | -75 to 150 | CHRISTO-LUBE® MCG 146N is a fully fluorinated, very light viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 148 | -50 to 250 | CHRISTO-LUBE® MCG 148 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE and cut with a fluorinated solvent. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 153 | -30 to 260 | CHRISTO-LUBE® MCG 153 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating valve and regulator components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. Additionally, CHRISTO-LUBE® MCG 153 is used to lubricate plastic components typically found in automotive applications and is approved to Chrysler Material Specification MS-9987 and meets Ford Material specification WSS-M13P12-A. This product is registered H1 by the NSF (156997) |
|
CHRISTO-LUBE® MCG 153K | -30 to 260 | CHRISTO-LUBE® MCG 153K is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating valve and regulator components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. Additionally, CHRISTO-LUBE® MCG 153K is used to lubricate plastic components typically found in automotive applications. |
|
CHRISTO-LUBE® MCG 153MS | -30 to 260 | CHRISTO-LUBE® MCG 153MS is a wide temperature capable perfluoropolyether grease developed for use in high temperature with high load applications. It contains molybdenum disulfide for extreme pressure capability and is non-reactive with most chemicals, strong acids, fuels and solvents. Also, it is compatible with most plastics and elastomers. |
|
CHRISTO-LUBE® MCG 157 | -20 to 260 | CHRISTO-LUBE® MCG 157 is a fully fluorinated grease thickened with PTFE which was developed for use in low-pressure systems where non-reactivity with chemicals including strong acids and oxidizers, fuels, solvents, etc. is an important factor. CHRISTO-LUBE® MCG 157 is suitable for use in applications including gears, valves, screws, bearings, and in systems employing elastomeric and plastic seals, gaskets, and o-rings. |
|
CHRISTO-LUBE® MCG 157RP | -20 to 260 | CHRISTO-LUBE® MCG 157RP is a fully fluorinated grease thickened with PTFE which was developed for use in low-pressure systems where non-reactivity with chemicals including strong acids and oxidizers, fuels, solvents, etc. is an important factor. CHRISTO-LUBE® MCG 157RP is suitable for use in applications including gears, valves, screws, bearings, and in systems employing elastomeric and plastic seals, gaskets, and o-rings. In addition, this grease is formulated with rust preventative additives for protection of metal parts which are subject to corrosion. |
|
CHRISTO-LUBE® MCG 158 | -50 to 260 | CHRISTO-LUBE® MCG 158 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 158S | -50 to 260 | CHRISTO-LUBE® MCG 158S is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 159 | -20 to 260 | CHRISTO-LUBE® MCG 159 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This NLGI Grade #3 fluorinated grease is especially useful in lubricating bearings, gears and actuators typically found in the semiconductor industry. CHRISTO-LUBE® MCG 159 is clean room compatible and performs exceptionally well under extreme vacuum conditions. |
|
CHRISTO-LUBE® MCG 160 | -15 to 260 | CHRISTO-LUBE® MCG 160RP is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is formulated with a thermally stable base oil making it especially suitable for use in high temperature environments. |
|
CHRISTO-LUBE® MCG 160RP | -15 to 260 | CHRISTO-LUBE® MCG 160RP is a fully fluorinated, high viscosity PFPE grease thickened with PTFE and fortified with anti-corrosion additives. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 161 | -15 to 260 | CHRISTO-LUBE® MCG 161 is a fully fluorinated, high viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 161-10HT | -15 to 250 | CHRISTO-LUBE® MCG 161-10HT is CHRISTO-LUBE® MCG 161 dispersed in a non-flammable fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a film of CHRISTO-LUBE® MCG 161. Details of CHRISTO-LUBE® MCG 161 are included below: CHRISTO-LUBE® MCG 161 is a fully fluorinated, high viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 169 | -50 to 150 | CHRISTO-LUBE® MCG 169 is a fully fluorinated, very light viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 173 | -45 to 300 | CHRISTO-LUBE® MCG 173 is a fully fluorinated, high viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 173-10 | -45 to 250 | CHRISTO-LUBE® MCG 173-10 is CHRISTO-LUBE® MCG 173 grease cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a film of CHRISTO-LUBE® MCG 173 grease. Details of CHRISTO-LUBE®MC G 173 grease are included in the data sheet. |
|
CHRISTO-LUBE® MCG 180 | -50 to 260 | CHRISTO-LUBE® MCG 180 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 184 | -65 to 260 | CHRISTO-LUBE® MCG 184 is a fully fluorinated, low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 185 | -35 to 150 | CHRISTO-LUBE® MCG 185 is a fully fluorinated, medium viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 187 | -65 to 260 | CHRISTO-LUBE® MCG 187 is a fully fluorinated, low viscosity PFPE grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 188 | -15 to 260 | CHRISTO-LUBE® MCG 188 is a fully fluorinated, high viscosity PFPE grease thickened with PTFE and fortified with anti-corrosion additives. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 189 | -60 to 260 | CHRISTO-LUBE® MCG 189 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating valve and regulator components where non-reactivity with harsh chemicals, fuels and solvents is an important factor. Additionally, CHRISTO-LUBE® MCG 189 is used to lubricate plastic and/or elastomer components typically found in automotive applications |
|
CHRISTO-LUBE® MCG 195 | -25 to 260 | CHRISTO-LUBE® MCG 195 is a fully fluorinated grease thickened with PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This soft consistency fluorinated lubricant is especially useful in lubricating under-hood automotive components where high temperature stability and non-reactivity with chemicals and fuels are important factors. |
|
CHRISTO-LUBE® MCG 197 | -40 to 260 | CHRISTO-LUBE® MCG 197 is a high viscosity fluorinated grease with excellent high temperature capability, excellent chemical resistance, and excellent material compatibility. |
|
CHRISTO-LUBE® MCG 199 | -30 to 250 | CHRISTO-LUBE® MCG 199 is a fully fluorinated grease thickened with PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 200 | -30 to 230 | CHRISTO-LUBE® MCG 200 is a fluorinated polysiloxane grease thickened with PTFE which operates under extreme temperature conditions. This non-migrating fluorosilicone lubricant is clean room compatible and is especially useful in lubricating various types of bearing, gears and rails found in semiconductor manufacturing environments. |
|
CHRISTO-LUBE® MCG 200A | -30 to 230 | CHRISTO-LUBE® MCG 200A is a fluorinated polysiloxane grease thickened with PTFE which operates under extreme temperature conditions. This non-migrating fluorosilicone lubricant is clean room compatible and is especially useful in lubricating various types of bearing, gears and rails found in semiconductor manufacturing environments. |
|
CHRISTO-LUBE® MCG 202 | -30 to 230 | CHRISTO-LUBE® MCG 202 is a specially formulated synthetic grease with exceptional extreme pressure, anti-wear and antirust properties. Under high load conditions the anti-seizure and anti-weld characteristics are greatly advanced over other greases in its chemical class. |
|
CHRISTO-LUBE® MCG 303 | -54 to 177 | CHRISTO-LUBE® MCG 303 was designed for use in pneumatic systems and other applications where elastomeric gasket and seal compatibility is required. It has a wide temperature range and excellent anti-wear and anti-rust characteristics. It is also capable of performing in ball, roller and plain bearings and gears. |
|
CHRISTO-LUBE® MCG 5170 | -75 to 250 | CHRISTO-LUBE® MCG 5170 is PFPE fluid cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives CHRISTO-LUBE® MCG 5170 the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® MCG 5170 | -75 to 250 | CHRISTO-LUBE® MCG 5170 is PFPE fluid cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives CHRISTO-LUBE® MCG 5170 the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. |
|
CHRISTO-LUBE® MCG 5170UV | -75 to 250 | CHRISTO-LUBE® MCG 5170UV is a PFPE fluid cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant has excellent low temperature properties and is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives CHRISTO-LUBE® MCG 5170UV the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. This product has a UV dye added for identification. |
|
CHRISTO-LUBE® MCG 5180UV | -40 to 250 | CHRISTO-LUBE® MCG 5180UV is a high viscosity PFPE fluid cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a thin film of oil. This lubricant is inert to oxygen and other aggressive chemicals. The PFPE fluid has extremely low surface tension and this gives CHRISTO-LUBE® MCG 5180UV the ability to work in applications where other lubricants fail due to lubricant starvation. The fully fluorinated chemistry is completely compatible with a vast majority of plastics and elastomers. This product has a UV dye added for identification. |
|
CHRISTO-LUBE® MCG 612 | -30 to 125 | CHRISTO-LUBE® MCG 612 is characterized by exceptional mechanical stability, high dropping point, high load carrying performance, reduced wear, and excellent resistance to water and corrosion. |
|
CHRISTO-LUBE® MCG 709 | -65 to 260 | CHRISTO-LUBE® MCG 709 is a fully fluorinated, medium viscosity PFPE grease thickened with precision PTFE. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and in a vacuum and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 709RP | -65 to 260 | CHRISTO-LUBE® MCG 709RP is a fully fluorinated, medium viscosity PFPE grease thickened with precision PTFE and fortified with anti-corrosion additives. This grease operates under extreme temperature conditions, has outstanding stability with oxygen and in a vacuum and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful where non-reactivity with harsh chemicals, fuels and solvents is an important factor. |
|
CHRISTO-LUBE® MCG 734 | -50 to 260 | CHRISTO-LUBE® MCG 734 is a fully fluorinated grease thickened with a very efficient PTFE which operates under extreme temperature conditions, has outstanding stability with oxygen and excellent compatibility with metals, plastics and elastomers. This medium consistency fluorinated lubricant is especially useful in lubricating various types of bearings, gears and actuators. CHRISTO-LUBE® ® MCG 734 is formulated with additives to protect against corrosion of metal parts. |
|
CHRISTO-LUBE® MCG 905X-10 | -40 to 200 | CHRISTO-LUBE® 905X-10 is CHRISTO-LUBE® MCG 905X PASTE cut with non-combustible fluorinated solvent. When this material is applied, the solvent evaporates and leaves behind a film of CHRISTO-LUBE® MCG 905X PASTE. |